Eagle

Download armor measurement form here!

Generic coach measurement instructions

Click here for tips on how to take useful coach photos

Fleetwood Eagle Instructions

Panels starting with P are the passenger side and panels starting with D are the drivers side.  Your panel numbers vary slightly depending on your configuration.

If you are getting the step surround, please download the PDF below and cross out and replace the listed dimensions with your own.

Step surround drawing

The P1 panel is in front of the front wheel.  Measure the width right at the crease.

P2 is directly behind the front wheel, measure the width at the crease.  If you have a docking light that will interfere with your stainless we will need you to fill out the docking light form HERE.  Please be sure to include photos of these regions.

P3-P6 are straight doors, just measure the length.

P7 is in front of the rear wheels, measure the width at the crease

P8 is behind the rear wheels, measure at the crease and include measurements for a light if necessary as you did on P2

P9 is a straight door

P10 is an angled door, provide measurments A, B, and C as shown in the photo below.  For B and C simply measure from the top of the panel down to the crease at the front and rear edges.

 

D1 is the first door on the driver side

D2 is in front of the front wheel, measure the same as you did on the passenger side

D3 is behind the front wheel, measure the same as you did on the passenger side

D4-D8 are straight doors, just measure the length.

D9 is in front of the rear wheels, measure the width at the crease

D10 is behind the rear wheels, measure at the crease and include measurements for a light if necessary as you did on P2

Fod D11 please refer to the diagram below and include measurements A through H

FLEETWOOD DS RADIATOR DOOR PANEL

 

For grill caps just measure the overall length of each unique grill cap.

Information for installers