Discovery | Summit

Fleetwood Discovery Instructions

Panels starting with P are the passenger side and panels starting with D are the drivers side. Your panel numbers vary slightly depending on your configuration.

The P1 panel goes to the right of the entry steps, measure from the molding on the right to the bend on the left

P2 is on the left side of the entry steps, measure from the bend on the right side to the wheel well opening

P3 is just behind the front wheel, measure from the left edge to the opening.

P4 through P8 are straight doors, just measure the length.

P9 is in front of the rear wheels, measure the same as you did the front pieces along the wheel wells

P10 is behind the rear wheels, measure the same as you did the front pieces along the wheel wells

P11 is a straight door

P12 is an angled door, provide measurments A, B, and C as shown in the photo below. For B and C simply measure from the top of the panel down to the crease at the front and rear edges.

D1 is the first door on the driver side

D2 is in front of the front wheel, measure the same as you did on the passenger side

D3 is behind the front wheel, measure the same as you did on the passenger side

D4-D8 are straight doors, just measure the length.

D9 is in front of the rear wheels, measure the same as you did on the passenger side

D10 is behind the rear wheels, measure the same as you did on the passenger side

D11-D12 are straight panels.

D13 is an angled panel, measure the same way you did on P12

Information for installers